27
Replacing the Jump Solenoid
1. Remove the head cover (right).
2. Disconnect the connector. Remove the three setscrews
and jump solenoid.
3. The slope cam should slide on the slope cam guide
smoothly. Clean the solenoid if there is any lint or dust
on it.
4. Attach the jump solenoid to the machine.
Tighten the setscrews. Setscrews should be
positioned at center of holes.
5. Attach the head cover (right).
Setscrews
Connector
Slope cam
Slope cam guide
Solenoid bracket
