13
Switching power supply unit
To remove:
1. Remove the top cover, the belt cover and the front
cover (see page 1, 2 and 6-7).
2. Loosen the setscrew A. Remove the cord guide plate.
Replacing Electronic Components
Switching power supply
Setscrew A
Setscrew B
Power
supply
connector
(cord)
Cord guide plate
Setscrew B
Power supply connector (cord)
Foot control connector A
3. Disconnect the power supply connector from the
switching power supply unit.
4. Disconnect the foot control connector A.
5. Remove the setscrews B (3 pcs.), and the switching
power supply.
To attach:
1. Follow the above procedure in reverse.
Switching power supply