ELNA 9600 "Haute Couture" Instruction Manual Download

Page: 98 / 112

Edit

ATA

Built-in

USB

Card

memory

Embf

ROM

Location :

Open File

USB

Direct PC-Link

Connecting the machine and PC

This machine can be connected to the PC with the USB

cable included in the standard accessories.

You need to install the USB driver for the machine and

the PC Folder Tool on your computer.

The USB driver and PC Folder Tool are available in the

M860 Tools CD-ROM included in standard accessories.

The PC Folder Tool allows you to transfer the data

bilaterally between the machine and PC.

NOTE:

Refer to the instruction booklet of the M860 Tools

CD-R for more details.

Start up the machne and PC, and insert the type “A” USB

connector into the PC.

Insert the type “B” connector into the machine.

Press the PC-link tab to establish the communication

between the machine and PC.

Now, you can save and open the files, or transfer the data

between the machine and PC.

CAUTION:

Do not turn the power off or disconnect the USB cable
while the data transfer is in progress.
Otherwise the data will be lost or the memory
will be damaged.

Summary of Contents for 9600 "Haute Couture"

















































































































Search results

Summary of Contents for 9600 "Haute Couture"

Reviews:

Related manuals for 9600 "Haute Couture"

Brands by name

Popular brands

ELNA 9600 "Haute Couture", Instruction Manual

Search results

Summary of Contents for 9600 "Haute Couture"

Reviews:

Related manuals for 9600 "Haute Couture"

Brands by name

Popular brands