ELNA 9600 "Haute Couture" Instruction Manual Download

Page: 102 / 112

101

1/1

CD-ROM Drive

NOTE:

Do not use any other CD drives than the exclusive

CD-ROM drivefor this machine, which is available from

authorized dealers.

Insert the mini USB connector into the USB port on the

back of the CD-ROM drive.

Plug the USB connector into the USB port on the ma-
chine. The CD-ROM drive does not need external power
since it is supplied from the machine via the USB cable.

Turn on the machine and press the open file key.

The open file window will open.
Press the CD ROM tab and select the folder that contains
embroidery design data in the Jef format.

Select the desired pattern by pressing the pattern icon.

NOTES:

The hoop size of the design will be indicated on the
upper left corner of the pattern icon key.

Summary of Contents for 9600 "Haute Couture"

















































































































Search results

Summary of Contents for 9600 "Haute Couture"

Reviews:

Related manuals for 9600 "Haute Couture"

Brands by name

Popular brands

ELNA 9600 "Haute Couture", Instruction Manual

Search results

Summary of Contents for 9600 "Haute Couture"

Reviews:

Related manuals for 9600 "Haute Couture"

Brands by name

Popular brands