ELMOT 024, User Manual

Page: 15 / 48

15
USE
ATTENTION! Do not use the appliance if the blades of the heads 3 and
4 (fig.
A
) are damaged or if the blade block is not working correctly.
Do not use the appliance on wet hair.
The Elmot-024 rechargeable Trimmer is a multifunctional product designed for finish-
ing and styling, with two different heads and an adjustable guide comb.
TURNING THE APPLIANCE ON AND OFF.
Turning on
•
Move switch
1
(fig. A2 ) to the ON position; the LED
10
(fig. A ) will light up green.
Turning off
•
Move switch
1
(fig. A2 ) to the OFF position; the LED
10
(fig. A ) will go out.
USEFUL TIPS FOR CUTTING
• Wash the hair as usual, dry and brush it in the direction of growth to untangle
any knots.
•
After drying, do not use hairspray, mousse or gel.
• Start with the highest setting of the adjustable guide comb
7
(fig. A1 ) and gradu-
ally reduce the hair length setting.
•
For best results, use the appliance against the direction of hair growth.
• If hair starts to clog the adjustable guide comb
7
, remove the guide comb from
the appliance (see par. „Removing the adjustable guide comb“) and clean away
the hair (blow and/or brush out).
•
Use the U-blade head
3
(fig. A1 ) to cut and finish.
•
Use the precision design head
4
(fig. A1 ) for styling.
USING THE APPLIANCE
Use of the adjustable guide comb for the U-blade head.
To insert the adjustable U-blade guide comb
7
(fig. A ) follow the instructions below:
•
Check that the appliance is off.
• Slide the adjustable guide comb
7
onto the head until you hear it click into place
(fig. B1 ).
•
Ensure that the guide comb
7
is correctly inserted in the slots on either side.
• With the adjustable guide comb
7
inserted, the appliance has 5 different hair
length settings: