147
Replacing the Lens
The camera lens can be replaced by the optional lens.
1
Remove the lens cover.
Remove the lens cover from the camera unit mounting bracket by
turning the lens cover counterclockwise.
2
Remove the lens.
Remove the lens from the camera unit mounting bracket by turning
the lens counterclockwise.
The rubber spacer attached to the lens is to fix the lens.
Be careful not to lose this rubber spacer.
3
Attach the optional lens for replacement to the camera unit
mounting bracket by turning the optional lens clockwise.
After the lens is replaced, the attached optional lens
should be adjusted on focus (
Î
P149). When it's out of
focus with optional lens used, mount the rubber spacer
attached to the standard lens to the optional lens, taking
off the spring. When attaching the rubber spacer (Fig. 1) or
the spring (Fig. 2) to the optional lens, be sure that the
direction of attachment is correct, and attach the rubber
spacer or the spring on the lens fully to the dead end.
Attachment lens
Counterclockwise
Camera unit mounting bracket
Lens cover
Counterclockwise
Optional lens
Clockwise
Spring
Wider
Rubber spacer
Fig. 1
Fig. 2
