Elmo P30HD Instruction Manual Download Page 67

Page: 67 / 95

English

VANCED

OPERA

TIONS

3-3 Presentation using a USB-connected

PC with the supplied software

• Set [USB Mode] to [Application] from the Preferences menu on the screen.

N o t e

“Image Mate” is available from the supplied CD-ROM.

By using the “Image Mate” software for controlling this equipment included in the CD-ROM, you can

perform the following tasks:

　・

Transfer movie/picture data to the PC

　・

Operate the product from the PC

For information on the requirements of the connected PC, OS types and the software guides, see the “Image

Mate” installation manual and the “HELP folder” on the CD-ROM.

CAUTION

• Do not connect/disconnect the USB cable while operating the equipment using the operating panel

or remote control. This may cause a malfunction.

• We recommend using a USB 2.0-compliant USB cable.

• Depending on the USB environment used by the PC or any peripheral device, image

transfer may be disrupted.

• Operation is not guaranteed for all environments.
• Make sure to disconnect the USB cable before switching [USB Mode] from the OSD menu.

N o t e

Summary of Contents for P30HD
































































































Search results

Summary of Contents for P30HD

Reviews:

Related manuals for P30HD

Brands by name

Popular brands

Elmo P30HD, Instruction Manual

Search results

Summary of Contents for P30HD

Reviews:

Related manuals for P30HD

Brands by name

Popular brands