Elmo CRB-2, Quick Start Manual

Page: 21 / 26

21
◆Caution
・When there is misalignment of the projected image and the pen's position, perform the pen calibration of step 5
・Do not change the position of the sensor or the screen size（※）. Doing so may cause failure of proper
detection of the pen position and you may not be able to draw correctly.
※Screen size changes according to the change of the projection distance.
The screen size also changes when the resolution of monitor, projector or Document Camera is changed.
・The LED of the sensor turns red when the pen position is out of the drawing area or the battery of the pen
is run out.
・A multiple number of pens cannot be used.
６．The pen calibration is completed and the pen operation is ready.
●When using with L-12iD
The drawing operation and the operation of icons displayed on the screen are now possible.
◆ When using with computer/ Document camera
The mouse operation of the computer is now possible.
The drawing operation is possible by starting ELMO Interactive Toolbox.
Pen tip: Left button of the mouse
Button 1: Right button of the mouse
Pen tip
Button 2
Button 1
◆Mouse operation of the computer with the pen