ELMETRON CO-505, User Manual, Page: 47 / 60

- 41 -
14. STORING AND READOUT OF THE RESULTS
The meter enables storing of 4000 results of the currently measured function.
The results are stored in EEPROM memory, which is non-volatile, so the data
isn’t lost even after complete lack of power. Before starting work it is
necessary to choose the parameters of storing or readout of the stored
results.
14.1. Parameters of storge and readout from the memory
The parameters are changed in the readout mode. It may be entered from
every measuring function by pressing and holding the button, until on
the display the number of the last stored result will be displayed. This number
is displayed on turns with the stored result.
Before memorising, choose the way of collecting results: on request or
automatically in series, and also the way of displaying the result.
Next presses of the button show screens with following parameters
which may be changed:
a. - taking or printing series or single results.
Pic. 18.
With the ,
buttons choose in the lower row
or symbol
(Pic. 18.). Choosing activates storing the results automatically and -
storing singly, after every press of button.