ELMETRON CO-505, User Manual, Page: 17 / 60

- 11 -
6.3. Changing the sensor number
If there is more than one sensor’s characteristic stored in the meter’s
memory, it is possible to replace the sensor without the need of calibration.
This option is quite useful in case of working with more than one sensor. It is
necessary to connect the sensor calibrated earlier, marked with the number
which responds to the number stored in the memory and choose this
number.
In order to do so, in the measuring mode:
-
press the button till the moment of displaying , or symbol in
the upper row of the display, than using the ,
buttons choose
the sensor number. Under this number the calibration results will be stored
(pic.5). Below the sensor number one of the following signs will be
displayed:
- under this number there is no characteristic stored and
the producer’s values are provided. In the measuring mode the
sensor number will be flashing.
- under this number there are values of the last calibration
stored.
Additionally, the points in which the sensor is calibrated are shown under the
sensor number.
Pic. 5.
-
return to the measuring mode by pressing the chosen function button.