Base Station Terminals
1
Terminal for plug-in power unit (number 2430)
2
serial port (RS232 / V.24) for base station for programming the base station using
software tools, or for connection to an elmeg PABX system for caller ID (CLIP)
3
16-pin terminal strip for 8 analog ports (terminal 0 on the right, next to the serial port)
Connect the individual wires of the installation cable to the terminals (K3). To do this,
use a suitable screwdriver to press the contact springs (K1 or K2) down and insert
the wires of the installation cable (stripped over a length of around 7 mm) into the ter-
minal block. Gently pull on the cable to ensure that the connections are secure.
Please take the set assignment of handsets to analog terminals into account:
Handset enrolled on channel 0 (master handset)
Line 0
Handset enrolled on channel 1
Line 1
Handset enrolled on channel 2
Line 2
Handset enrolled on channel 3
Line 3
Handset enrolled on channel 4
Line 4
Handset enrolled on channel 5
Line 5
Handset enrolled on channel 6
Line 6
Handset enrolled on channel 7
Line 7
4
a b
Line 7
a b
Line 6
a b
Line 5
a b
Line 4
a b
Line 3
a b
Line 2
a b
Line 1
a b
Line 0
1
2
3
K1
K2
K3
Fig. 2
14
G:\_elmeg\DECT300\Basis\V1\Ger-UK\de_uk-d300-mt-10x1.vp
Dienstag, 12. Februar 2002 11:00:15
Farbprofil: Generic CMYK printer profile - None
Komposit Standardbildschirm
