Safety notes
•
Storage temperature:-25°C ... +70°C.
•
Operating tempe5°C ... +40°C.
Only connect the base station when the permissible ambient operating
temperature has been reached.
Please note that condensation on or in the unit must be prevented when moving
from cold to warm surroundings.
Only remove the base station from the package when the ambient operating tem-
perature has been reached.
•
Avoid the following:
Direct sunlight
Sources of heat (e.g. radiators)
Electronic devices (e.g. stereo components, office equipment or micro-
wave devices)
Ingress of moisture or liquids
•
Clean the base station using a slightly dampened cloth.
•
Only use approved accessories.
•
Under certain circumstances, medical equipment may be affected when
DECT devices are switched on. Please observe all corresponding regula-
tions or act as appropriate for the given conditions.
•
Do not connect or disconnect any lines, or make any calls during thun-
derstorms.
•
Unplug the plug-in power unit before removing the cover to work on the
terminal bay. Replace the cover before plugging the power unit back in.
Contents of package
•
Base station
•
Plug-in power supply unit (2430)
•
Screws / dowels
•
Plastic clip (strain relief)
•
Installation guide
Installing the Base Station
•
Please observe the safety instructions.
•
Select an installation location that is a maximum of 1.5 meters away from
a 230 ~ outlet and which offers favorable conditions for radio propagati-
on.
Only open the enclosure when the unit is de-energized.
Caution! You may be electrostatically charged. Before opening the base station,
touch a conducting object connected to “Ground” (such as a water line) to dissipate
this charge.
2
12
G:\_elmeg\DECT300\Basis\V1\Ger-UK\de_uk-d300-mt-10x1.vp
Dienstag, 12. Februar 2002 11:00:13
Farbprofil: Generic CMYK printer profile - None
Komposit Standardbildschirm
