3
Technical Support: +44(0)23 9269 6638 (option 3)
PAK200567_01B ©2016 ELMDENE INTERNATIONAL LTD
Mechanical
Model
G2401BMU / G2402BMU
G2403BMU / G2405BMU
Module Dimensions
w x h x d (mm / external)
152 x 106 x 52
157 x 143 x 55
Recommended Batteries
2 x 12V NP7 or NP17
Weight (excluding batteries)
G2401BMU / G2402BMU
G2403NU / G2405NU
280g
650g
Environmental
Temperature
-10 to +40°C (operating) 95% RH non-condensing
-20 to +80°C (storage)
Connections
+O/P
+ve voltage O/P to load equipment
-O/P
-ve voltage O/P to load equipment
+BATT
Red lead to standby battery 1
-BATT
Black lead to standby battery 2
GEN FAULT
Volt-free contacts for general faults
EPS FAULT
Volt-free contacts for loss of mains indication
O
PERATION
This unit is intended for use by Service Personnel only - There are NO USER SERVICEABLE parts inside.
The Green Mains LED will be illuminated whilst the mains supply is present. In the event of a fault condition,
the Yellow Fault LED will be illuminated. The Orange Battery Charging LED will be illuminated when the
battery is not fully charged and is charging normally. When the battery is fully charged it will be
extinguished.
I
NSTALLATION AND
S
ET
-U
P
This unit is only suitable for installation as permanently connected equipment. The PSU is
NOT SUITABLE
for
external installation
. EQUIPMENT MUST BE EARTHED
. Before installation, ensure that external disconnect
device is
OFF
. The PSU should be installed according to all relevant safety regulations applicable to the
application.
Module Enclosure & Mounting
This power supply module has high voltage present and is for use by Service Personnel only. This power
supply module MUST be securely mounted within a robust enclosure having suitable means to prevent
unintentional access to the module. Suitable notices must be affixed to the outside of the enclosure to warn
of high voltages present internally.
Mounting
1)
Mount securely in correct orientation allowing minimum clearance of 20mm all round – see diagrams
below.
