6
Technical Support: +44(0)23 9269 6638 (option 3)
PAK200790_02A Oct 2019 ©2019 ELMDENE INTERNATIONAL LTD
Installing the Standby Battery
Battery Location
22.
Mount two 12V batteries in lower part of enclosure, see below for correct orientation.
23.
Note position of
‘
H
’
box brackets for each battery option.
24.
Ensure all battery terminals are sufficiently insulated to prevent accidental shorting to each other or the
enclosure metalwork.
Warning: Always use two 12V batteries connected in series. This product will not work with one 12V battery
.
Compatible Batteries
Battery Capacity (2x 12V)
Type (closed) VRLA.:
PowerSonic model
Yuasa model
Interlogix model
Europa model
1.2 Ah
PS-1212
NP1.2-12
2.1 Ah
PS-1221
NP2.1-12
7 Ah
PS-1270
NP7-12
BS127N
EB12-7.2
25.
Where a dual box solution (PSE and CIE in separate enclosures) is used all cabling between the two
boxes should be routed to use separate case entry/exit holes from other cabling using suitable cable
glands to protect the cables
.
26.
Connect the two 12 V standby batteries in series using the
single link cable provided. Connect the
negative
of one
battery to the
positive
of the
other
battery.
CAUTION
–
DO NOT CONNECT the two remaining (free)
battery terminals to each other
27.
Using the battery lead provided, connect the two white wires
to the “Temp” terminal
s on the PSU (polarity is not
important) and the RED lead to
“
Bat+
” and the BLACK lead to
“
Bat
–“.
CAUTION:
Connect battery leads to PSU terminals FIRST - THEN
connect to the battery LAST.
MAINS
SUPPLY
+
+
-
- + -
T
T
12V
BATTERY
+
-
12V
BATTERY
+
-
M A INS FUSE
FAULT OUTPUTS
FUSE #1
FUSE #2
TEMPERATURE SENSOR
SERIES BATTERY LINK
-
LOAD OUTPUT
+
LO AD 1
-
+
LO AD 2
1
2
3
4
5
6
2401ST in C box with 7Ah batteries
2401ST in T box with
1.2Ah batteries
2401ST in T box with
2.1Ah batteries
