3
2. INSTALLATION
2.1 CASING
VA/V3 is mounted in a robust splashproof casing made of glassfiber reinforced polyester with transparent
polycarbonate front cover. The protection class is IP 65.
2.1.1
372
302
( mm )
312
382
175
2.2 MOUNTING
The water sampler shall be mounted vertically using four screws (
∅
7 - 9 mm). The mounting is done through
the four mounting brackets at the rear side of the sampler.
NOTE! Avoid placing the sampler in direct sunlight!
2.3 ELECTRICAL INSTALLATION
External control
For connection to external control a 4-wire cable with Amphenol-contact is included, see figure 2.3.1 below. For
pulse related control black
and black wire
are used and for signal related control brown (+)
and blue
wire (-)
are used.
NOTE! The wires not used have to be individually isolated!
2.3.1
400 VAC
16 A
250
12 A
Main supply 220 V/50 Hz
Contact chassi,
Amphenol
4-wire cable
external
1
2 3
4
Connection to external alarm
Summary of Contents for VA/V3
Page 1: ...Water Sampler VA V3 v 2 6...
