Sagab by Elma 911
23
10A
μ
COM
every
15 min.
MAX
¦ ¸
V
AUTO
Ω
V
V
Mode
DC
AC
C F
μ
Range
MAX
C
F
English User Manual
Multimeter
Safety information
The following safety information must be observed to insure maximum personal safety
during the operation at this meter:
Do not use the meter if the meter or test leads look damaged, or if you suspect that the
meter is not operating properly.
Never ground yourself when taking electrical measurements. Do not touch exposed
metal pipes, outlets, fixtures, etc., which might be at ground potential. Keep your body
isolated from ground by using dry clothing, rubber shoes, rubber mats, or any approved
insulating material.
Turn off power to the circuit under test before cutting, unsoldering, or breaking the
circuit. Small amounts of current can be dangerous.
Use caution when working above 60V dc or 30V ac rms. such voltages pose a shock
hazard.
When using the probes, keep your fingers behind the finger guards on the probes.
Measuring voltage which exceeds the limits of the multimeter may damage the meter
and expose the operator to a shock hazard. Always recognize the meter voltage limits
as stated on the front of the meter.
Never apply voltage or current to the meter that exceeds the specified maximum:
