Safety / Maintenance / Repair
30
BA_Elmasteam 4
5
_EN_Vers. 01.2019
© Elma Schmidbauer GmbH
7.5
Repair
Contact the supplier or manufacturer of this machine for repairs.
Repairs require specialist knowledge and are only permitted to be
performed by specialist personnel.
Danger of electric shock from live parts in the machine!
Disconnect the machine from the mains power supply before
repair work.
Risk of scalding from discharging steam!
Do not open pressure tank screw cap on the filling nozzle of the
pressure tank at pressure above 0 bar.
Do not remove parts in the machine that are pressurised above
0 bar.
Let the machine cool down before opening.
Danger of burns from hot surfaces!
Let the machine cool down first before opening.
Only original parts are permitted to be used for repairs.
Under certain circumstances, opening the machine can invalidate
the CE conformity.
The manufacturer shall not accept any liability for consequential
damage caused by unauthorised opening of the machine.
7.6
Prepare machine for shipment
The following points must be observed if it is required to send the
machine to a service point or the manufacturer:
•
Empty the machine completely before shipping.
•
Pack the machine securely for transport in a suitable container,
if possible in the original carton.
WARNING
CAUTION
CAUTION
