First start-up
16
BA_Elmasteam 4
5
_EN_Vers. 01.2019
© Elma Schmidbauer GmbH
4.2
Fixed nozzle mounting (option)
Ensure that the Elmasteam is switched off and depressurised.
1. Remove the blanking plug by unscrewing the nut (
Fig.
4.2.1.A
).
2. Screw the fixed nozzle with the nut (
Fig. 4.2.2
.
B
) onto the
connection nozzle on the machine.
3. Tighten the nut with a ¼ turn using a 12 mm open-ended
spanner.
4. Slide the black protection sleeve in the direction of the arrow
over the nut (
Fig. 4.2.3.
).
Fig. 4.2.1 Blanking plug in the delivery condition
Fig. 4.2.2 Screwing on hand piece
Fig. 4.2.3. Sliding protection sleeve over connection
Procedure
A
B
