Before the initial commissioning
20
BA_Elmasolvex_SE_EN_Vers. 03.2018
© Elma Schmidbauer GmbH
4.2
Exhaust air equipment (optional) for solvent vapours
The optional exhaust air equipment described below can be
attached to the drying chamber exhaust air pipe (
Abb. 3.9.1.G)
to prevent unpleasant odours.
Observe the local health and safety regulations concerning
unpleasant odours from solvents at the workplace.
Attention! Explosion hazard / deflagration in the immediate area
of the ventilation outlets of the cleaning machine and / or the
outlets of any connected exhaust air equipment.
Keep all kinds of ignition sources away from the immediate
danger zone.
Prevent ignition sparks from electrostatic discharge!
Option 1:
An appropriate pipe (Ø 75 mm / max. 3 m length) for venting,
ideally with access to the open air, must be attached to the
exhaust air pipe of the drying chamber (
Fig. 3.9.E
). Passive
ventilation (no backpressure) is intended due to the discharging
air flow.
Attention! A finned tube is not suitable as dangerous
concentration of condensate can deposit in the fins.
Option 2:
Connection to an available extractor on the building side (flow
rate limit 30 m³/h).
Danger of damage to the machine. The end of the exhaust air
tube must be freely accessible in a ventilated area and must
not be immersed in water.
DANGER
Drying chamber
exhaust air tube
ATTENTION
