Elma ELMA-1336, Instruction Manual

Page: 18 / 29

16
If you attempt to set y such that y < 1
– 6.98x, the meter display shows “
ErrA
”,
and returns to the beginning of the SET mode. Reenter the values.
5-5-3 Applying CF correction to measurements
1. Press CF key, the display now shows the CF-corrected results, the
annunciator
“
CF
” is displayed.
2. Press CF key again to exit the CF mode and uncorrected measurements are
displayed.
If you wish to clear the stored CF values, return to the procedure described
under step 5-5-2 and manually input o
’s into all columns.
5-6 Manual Data Memory and Read Operations
5-6-1 To memorize the reading
1. Press MEM key each time will store one set of the measured value to the
memory. At this moment, LCD will show the
“
M
” mark and the memory
address number. Total memory size is 80 sets.
2. When the memory is full, LCD will show
“
M FU
” mark.