Elma Laser X360
17
Please read thoroughly and comply with the Safety Instructions and User Manual before using this
product. Failure to read and follow may void the warranty.
WARNING!
CLASS
Ⅱ
LASER PRODUCT
COMPLIES WITH CFR 1040.10 AND 1040.11
Max. Power Output:
<1mW
Wavelength:
505nm-520nm
LASER RADIATION:
DO NOT STARE INTO BEAM.
DO NOT DIRECT EYE EXPOSURE.
AVOID VIEW WITH OPTICAL INSTRUMENTS
.
ATTENTION:
Read all instructions prior to operating this laser tool. Do not remove any labels from tool.
o
While the product is in operation, be careful not to expose your eyes to the emitting laser beam
(Green light source). Exposure to a laser beam for an extended time may be hazardous to your
eyes.
o
Do not attempt to view the laser beam through optical tools such as telescopes as serious eye
injury may result.
o
Do not disassemble or modify the laser in any way. Modifying the tool may result in hazardous
Laser Radiation Exposure.
o
Do not operate the laser around children or allow children to operate the laser. Serious eye injury
may result.
o
An exposure to the beam of a Class 2 laser is considered safe for a maximum of 2 seconds. Eyelid
reflexes will normally provide adequate protection.
o
The following label/print samples are placed on the product to inform of the laser class for your
convenience and safety.
User Guide, Maintenance and Care
o
When not in use please power OFF the tool and place the pendulum lock in locked position.
o
The laser tool is sealed and calibrated at the plant to the accuracy specified.
o
It is recommended to carry out an accuracy check before its first use and periodic checks during
future use especially for precise layouts.
o
Do not touch the glass window in case leaving any fingerprint on the window, which may affect the
performance of the laser.
o
Do not store the laser tool in direct sunlight or expose it to high temperatures. The housing and
some internal parts are made of plastics and may become deformed at high temperatures.
o
Exterior plastic parts may be cleaned with a damp cloth, NEVER use solvents. Use a soft, dry cloth
to remove moisture from the tool before storage.
o
Store the tool in its case when not in use. If storing for extended time, remove batteries before
storage to prevent possible damage.
o
Do not dispose of this product with household waste.
o
Always dispose of batteries per local code.
o
Please recycle in line with local provisions for the collection and disposal of electrical and
electronic waste under the WEEE Directive.
Safety Instructions
