Elma ContiLight
side 12
English usermanual
Introduction / Scope of Supply
The Continuity and Line Tester HDT ContiLight are appropriate for continuity testing and
electronic wiring, line networks, systems, instruments and components of a measurement
impedance of 10 k
Ω.
The instruments are equipped with an additional incorporated torch function with steady
burning light, facilitating any testing in dark switch cabinets or in case of diffuse lighting.
● Acoustic and optical continuity indication
● Torch Function
● Resistance Range up to 10 kΩ
● High test current up to 200 mA
● Fixed mounted test leads with test probes
References marked on instrument or in instruction manual:
Warning of a potential danger, follow with instruction manual.
Caution! Dangerous voltage. Danger of electrical shock.
Reference! Please use utmost attention.
Continuous double or reinforced insulation category II IEC 536
Conformity symbol, the instrument complies with the valid directives. It complies
with the EMC Directive (2004/108/EEC), Standards EN 61000-6-3:2007 and EN 61000-6-
1:2007 are fulfilled. It also complies with the Low Voltage Directive (2006/95/EEC),
Standard EN 61010-1 is fulfilled.
Instrument fullfill the standard (2002/96/EEC) WEEE. This marking indicates that this
product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for environmental
safe recycling.
Scope of Supply:
1 St. HDT ContiLight
1 St. 9 V Battery
1 St. instruction manual
Summary of Contents for ContiLight
Page 3: ...Technical Data 15...
