Elma 22 - 25 - 27
side 42
Non-Contact EF-Detection (BM25 & BM27)
Typical Voltage
Bar Graph Indication
15V to 55V
-
30V to 85V
- -
55V to 145V
- - -
85V to 190V
- - - -
above 120V
- - - - -
Indication: Bar graph segments & audible beep tones proportional to the field strength
Detection Frequency: 50/60Hz
Detection Antenna: Top left corner of the meter
Probe-Contact EF-Detection: For more precise indication of live wires, use the Red (+) probe for
direct contact measurements
LIMITED WARRANTY
BRYMEN warrants to the original product purchaser that each product it manufactures will be free
from defects in material and workmanship under normal use and service within a period of one year
from the date of purchase. BRYMEN's warranty does not apply to accessories, fuses, fusible
resistors, spark gaps, batteries or any product which, in BRYMEN's opinion, has been misused,
altered, neglected, or damaged by accident or abnormal conditions of operation or handling.
To obtain warranty service, contact your nearest BRYMEN authorized agent or send the product,
with proof of purchase and description of the difficulty, postage and insurance prepaid, to BRYMEN
TECHNOLOGY CORPORATION. BRYMEN assumes no risk for damage in transit. BRYMEN
will, at its option, repair or replace the defective product free of charge. However, if BRYMEN
determines that the failure was caused by misused, altered, neglected, or damaged by accident or
abnormal conditions of operation or handling, you will be billed for the repair.
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR
USE. BRYMEN WILL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Summary of Contents for 25
Page 44: ......
