6 of 29
Requirements for Installation
WARNING!
1. Always ground this unit
Connect the power plug to a receptacle grounded.
Do not forget to ground this unit, to protect you and the unit from electrical shock in case of
power surge. Choose a receptacle with grounding connectors as often as possible.
Do not connect the grounding wire to a gas pipe, or by means of a lightning rod or telephone
line. A fire or electrical shock will occur.
2. Choose a proper place for installation
Do not install this unit in a place where:
Rough or dirty surface.
Flammable gas or corrosive gas is generated.
There is direct sunlight.
There is excessive humidity and dust.
There is constant vibration.
3. Do not modify
Modification of this unit is strictly prohibited. This could cause a failure.
4. Installation on horizontal surface
Set this unit to the flattest place.
CAUTION!
5. Use a correct power receptacle
Use a correct power receptacle that meets the unit’s rated electric capacity.
Electric capacity:
ECOSmart : 100 – 240 VAC, 50/60Hz, 150W(Max)
