19 of 29
For process 1 :pay attention following things
1) Push “ST1” button washing in water process start first. ST LED ”1” (“1.” during displaying
pad usage counter) blink during this process.
2) The front door opens automatically after finishing of process has been done (after the
front door opens, the display is blinking).
3) Leave the pad and disc, put one-drop compound on the disc. Use a compound after
shaking the bottle well before the use.
4) The repair process starts automatically after closing the front door (ST LED blink stops,
no need to press the start button again).
5) After repairing, perform the following operations to start process 1 again.
・
Push “ST1” button with opening the front door open (“1.” and pad usage counter
are displayed on ST and TIME LED, and ”1.” start to blink).
・
Set the disc to turn table, put
one-drop
compound on the disc.
・
Close the front door (Water process is skipped).
7. The front door opens automatically after finishing of process has been done.
8. Follow the operation process from 4, exchanging pad.
