99400 Series
5
Safety Instructions
1. Read all safety and operating instructions contained in this manual prior to use of the tool. Failure
to follow all instructions listed below may result in electrical shock, fire and/or serious injury.
2. Do not operate this tool while under the influence of drugs or alcohol.
3. Do not operate this tool in an explosive atmosphere, such as in the presence of flammable liq-
uids, gases or dust.
4. Check the motor, cable and plug prior to every use of the tool. Repair or replace any defective
parts prior to use of the tool.
5. Do not use motor in wet conditions.
6. Use only extension cords and plugs approved for outdoor use when working outdoors.
7. Use appropriate safety equipment (i.e. safety glasses, ear plugs, dust masks, etc.) when using
this tool.
8. Ensure that long hair or loose fitting clothes are secure prior to use of the tool.
9. Do not use motor without the Rapid Hawk.
10. Never apply the motor to an unsecured work piece.
11. Power cable should be located to the rear of the motor during operation, away from the rotating
spindle.
12. Stay clear of any objects that may interfere with the operator’s ability to maintain control of the
motor as it reaches maximum torque.
13. Always disconnect the motor from the power source prior to performing any maintenance or
repairs.
Protection
To avoid damage to the tool and/or possible injury to the operator:
Do not continue to run the motor after the motor has reached its maximum torque.
Do not operate the motor beyond the maximum amperage rating shown on the name plate.
Use only original replacement parts from the motor manufacturer.
Summary of Contents for 99400 Series
Page 2: ......
Page 6: ...6 99400 Series...
