Parts List: Chrome grab bar x (1)
Escutcheon x (2)
Rubber washers x (4)
Metal washers x (2)
Bolts x (2)
Grab Bar
Tub Shell
To install the supplied grab bar first locate all the parts needed for installation. See drawing shown
above. Ready the bolt assembly by first placing a metal washer onto the bolt followed by a rubber
washer. Feed the bolt up through the tub shell and place another rubber washer over the extruded
bolt followed by the escutcheon. You may start the threading into the grab bar to hold the assembly
loosely in position and then repeat the process for the second bolt. Once the entire assembly is in
place, tighten the bolts with the supplied Allen wrench.
www.ellasbubbles.com
WARNING
Installation of Deck Mount Grab Bar
GRAB BAR WASHERS MUST BE INSTALLED TO
PREVENT CRACKING OF THE ACRYLIC SHELL,
FAILURE TO DO SO WILL VOID THE WARRANTY
*THE LARGER METAL WASHER IS THE MOST
IMPORTANT OF THE WASHERS, THIS ONE
ABSOLUTELY
MUST BE INSTALLED
TO
PREVENT ACRYLIC SHELL DAMAGE
Escutcheon
Rubber
Washer
Rubber
Washer
Metal
Washer*
Bolt
WARNING:
Under no circumstances install the grab bar without the large metal washer underneath the
tub shell. Doing so will leave the tub shell vulnerable to cracking and void the warranty.
16 of 26
