1.Install 3 extension support
brackets provides in the kit.
2. Clamp in place, the extension panel to the
walk in tub shell, lining up the facade of top
and front.
3.Pre-drill (+3/8") slightly wider holes than
mounting screws to allow for final
adjustment to the panel.
4. Mount extension with 7 screws, washers
and bolts.
5.Apply Silicone or white caulking as
needed.
Deluxe Dimensions: 5"W x 29 1/2"L x 37"H
Elite Dimensions: 7"W x 29 3/4"L x 37 3/4"H
Royal Dimensions: 7"W x 31 3/4"L x 37 3/4"H
Petite Dimensions: 7"W x 27 2/4"L x 37 3/4"H
L" Stainless Steel Brackets ...........................Qty (3) L"
Acrylic Bracket ........................................Qty (1) 1" x 1/8"
Bolts ...............................................Qty (7) 1" x 1/4" Bolts
...............................................Qty (7) 1" Screw
.......................................................Qty (1) 1/2" Nuts
.......................................................Qty (9) 3/8" Nuts
.......................................................Qty (7) Medium
Washers .........................................Qty (14) Small
Washers ..............................................Qty (14) Plastic
Washer .............................................Qty (1) Plastic Cap
...................................................Qty (1)
The extension kit can be installed as needed. Opening can be filled as desired.
Installing Extension Kits
www.ellasbubbles.com
3.& 4.
1
.
17 of 26