12
HP602L-HP602LG
3 CONNECTIONS
TAMPER :
Supporting terminals for connect anti-opening/anti-removal limit switch wires leading to control unit
24h input.
TC1:
Flasher block input. TC reference from control unit can be positive or negative.
BL1:
Control block input referred to positive or negative.
+
:
Module power positive.
- :
Power
negative
+FLASH- :
Flasher connection.
SPEAKER:
Speaker connection.
3.1 FOAM PROTECTION DEVICE CONNECTION (HP602LG)
•
Power the device by connecting the black wire to negative power
supply of siren unit. Red wire is already connected by the factory to
the positive of flash.
•
Tamper terminale block is the N.C. alarm ouput of the protection
module. Provide a series connection in the tamper line (as shown in 6.0).
