10
HP602L-HP602LG
1 GENERAL
FEATURES
MODEL
STAINLESS STEEL INTERNAL
PROTECTIVE CASE
FOAM AND
OVERTEMPERATURE
PROTECTION
HP602L
NO NO
HP602LG
YES YES
•
Stainless steel external box,
•
Controls managed by microprocessor.
•
BL1 and TC1 lock inputs with positive or negative reference.
•
Possibility of programming sounder when lock signal is permanently down.
•
Sounder counter: up to 5 over 24h or per activation sequence (TC transition)
•
Alarm log for units with TC output (flasher blinking)
•
System status report function: TC signal absence from control panel will cause
continuous flash blinking
;
•
Battery polarity inversion protection and power via control unit.
•
Anti-opening and anti-removal protection.
•
Initial lock function: the flasher will blink and the siren will not sound at first power-up ; connect lock signal (BL)
and TC unit to set up siren for operation.
•
Siren stops when the lock signal is down for
longer than the programmed time
. A new alarm cycle will be
generated if the lock signal goes down again.
•
Acoustic pressure: 104 dB(A) - HP602L model, 102 dB(A) - HP602LG model.
•
Internal low battery saver function stops the flasher and privileges the siren.
•
HP602LG model is provided with an electronic device to send alarm signals in case of foam or fire tamper
(ex.: with oxyhydrogen foam); it is recommended the use of a second siren or a telephone programmer
suitable to receive the tamper signal sent by the siren.
