(((ELKRON))) - CT10-M / CT11-M
15
6.5 SENDING GSM TEXT MESSAGES
• Text messages are always sent three times to an associated telephone.
NOTE
:
The communicator will send the default message
“<COMMUNICATOR......>”
if no
specific messages are programmed by means of the “SMS editor” program (see para-
graph 8.9) and text message transmission is enabled.
No backup call will be made if the text message cannot be sent (no field coverage).
6.6 STOPPING THE CALL CYCLE
• The call cycle can be stopped by dialling
12 in DTMF
(called “Barring code”) on the
telephone receiving the voice call.
• Voice messages can be barred as shown below.
• The call in progress and the remaining call cycle (voice and text messages) will be
completed if the “Barring code” is entered.
• If the input that caused the alarm is subjected to TC, the call cycle in progress is barred
when the TC switched to ON.
• The call cycle can also be barred locally by means of the keypad by entering a valid code
(user code or ENGINEER code, where enabled).
BASIC
MESSAGE
SPECIFIC
MESSAGE
BEEP
WAIT
FOR BARRING
BASIC
MESSAGE
SPECIFIC
MESSAGE
BEEP
WAIT
FOR BARRING
BASIC
MESSAGE
SPECIFIC
MESSAGE
BEEP
WAIT
FOR BARRING
10 s
5 s
0.5 s
5 s
10 s
5 s
0.5 s
5 s
10 s
5 s
0.5 s
5 s
WARNING AUTOMATIC CALL
FROM THE SMITH’S HOME
BURGLAR
ALARM
BEEP
WAIT
FOR BARRING
10 s
5 s
0.5 s
5 s
DIAL 12
CYCLE BARRED
Voice message structure
sent three times:
Example of barring:
