11
FM Mode
Selecting FM Mode
1. Press
MODE
/
MENU
button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Or it will
play the last FM station you were listening to.
3.
To manually change the FM frequency
, make sure no other order/system setting is
going on, press and hold
SCROLL
/
SELECT
knob for 3 seconds and then turn it to change
the frequency by 0.05MHz per step.
4.
To automatically scan
, while FM frequency shows up, press
SCROLL
/
SELECT
knob to
search for the next available station.
Scan Setting
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations.
1.
To change the scan settings to stop only at stations with good signal strength, press and
hold
MODE
/
MENU
button, turn
SCROLL
/
SELECT
knob to select
Scan setting
menu,
and then press
SCROLL
/
SELECT
knob to confirm.
2.
Turn
SCROLL
/
SELECT
knob
to select
„
Strong stations only
‟, and press
SCROLL
/
SELECT
knob to confirm.
Audio Setting
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a
poor signal-to-noise ratio (hiss).
1.
To play weak stations in mono, press
and hold
MODE
/
MENU
button, turn
SCROLL
/
SELECT
knob to select
Audio setting
menu, and then press
SCROLL
/
SELECT
knob to confirm.
2.
Turn
SCROLL
/
SELECT
knob
to
„
Forced mono
‟, press
SCROLL
/
SELECT
knob to
confirm.
