2/8
5132, 5133, 5134, 5135, 5136, 5137 02-60/2016 rev.:4
LARA Radio
1
1
2
2
3
4
3
4
LARA Radio
LARA Intercom
ELKO EP, s.r.o. | Palackého 493 | 769 01 Holešov, Všetuly | Czech Republic | e-mail: [email protected] | Support: +420 778 427 366
www.elkoep.com
External amplifi er
Output of speakers, audio cables
speaker
output (W)
2 x 4 Ω
2 x 20W
2 x 8 Ω
2 x 10W
2 x 16 Ω
2 x 5W
2 x 32 Ω
2 x 2.5W
When installing the speakers, use quality audio cables with
minimum diameter 0.5 mm, with maximum length of 30 m. It is
best to have the same cable length for the right and left channels.
left speaker
right speaker
Hardware installation
Requirements for installation environment:
- The product cannot be placed where it is exposed to moisture or excessive heat.
- Place the product at a spot where it can be connected to the Ethernet network. The Ethernet cable with PoE
supply should have a short a distance as possible between the player and PoE source due to voltage drop
occurring as the distance grows. Also use quality cables and connectors of a renowned brand for installation.
- Never install the player without its installation box, and it is prohibited to mount it directly into the wall, e.g. into
drywall partitions, where the device chassis would be directly wrapped in insulation material.
- Distributing individual elements of the installation must be defi ned prior to actual installation, prior to
interference (cutting) into walls or installation of boxes.
PoE (Power over Ethernet) is fed along a data network cable, without the need to provide power to the
machine by another separate cable.
Description of installation:
Install the bottom part of the LARA player into the box KU, we recommend a box that enables mounting
devices with greater depth.Connect the speaker cables into the terminals OUT L +/- OUT R +/-. You can
connect the input to an external amplifier into the terminals LINE OUT L, LINE OUT R, GND. Snap the Ethernet
cable into the RJ45 connector. Secure the device using the installation box screws. Snap the upper part of
the player into the design frame LOGUS
90
. Snap the upper part of the player with the frame to the lower part
of the player.
Connection of these two parts must be performed with care to avoid damaging the connectors. Connect
the other end of the Ethernet cable to the PoE switch or via the PoE adapter to the Wi-Fi router, switch. After
providing power, the display shows the system information, then after around five seconds the main display
of the player.
Options of design of the LARA player
Radio
Music
Videophone
Intercom
Audio zone
In-wall speaker
Installation box
Ceiling speaker
Box for surface mounting
Surface
mounting
Flush mounting
(adapted to be
mounted
inside the wall)
• LARA - can be mounted inside your wall (installation box) or off ers a surface mounting option.
Connection
