background image

ECP8_1J     ECP8_2J     ECP8_3J         

(630) 574-8484 

 

Elkay Manufacturing Company 

2000000698 (Rev. A - 07/22) 

 

Page 3

1. Safety

 

 

THINK

SAFETY!

Think Safety

Before performing any work, read and 

understand the safety instructions in 

this manual. 

1.1  General

Elkay Manufacturing Company (Elkay) cannot 

anticipate every possible circumstance that might 

involve a potential hazard during the installation  of 

this product. The warnings and instructions in this 

Installation / Use & Care manual are, therefore, not 

all-inclusive. If a tool, installation procedure, or work 

method that is not specifically recommended by 

Elkay is used, you must be satisfied that it is safe for 

yourself and others. You should also make sure that 

the product will not be damaged by the methods you 

choose.  

Most work-related accidents are caused by failure 

to observe basic safety rules or precautions. An 

accident can often be avoided by recognizing 

potentially hazardous situations before an accident 

occurs. As you install and maintain this product, 

you must be alert to potential hazards. You should 

also have the necessary training, skills, and tools to 

perform any installation or maintenance procedure.

1.2  Safety Alert Symbol

This is the safety alert symbol. It is used 

to alert you to potential personal injury 

hazards. Obey all safety messages that 

follow this symbol to avoid possible injury 

or death.

This manual contains WARNINGS, CAUTIONS, 

NOTICES, SAFETY INSTRUCTIONS, and NOTES 

which must be followed to prevent the possibility 

of improper service, damage to the equipment, 

personal injury, or death. The following key words 

call the reader’s attention to potential hazards.

Hazards are identified by the “Safety Alert Symbol” 

and followed by a signal word such as “WARNING” 

or “CAUTION”.

1.3  Definitions

DANGER

The signal word that 

indicates a hazard with 

a high level of risk 

which, if not avoided, will result in death or serious 

injury.

WARNING

The signal word that 

indicates a hazard with 

a medium level of risk 

which, if not avoided, could result in death or serious 

injury.

CAUTION

The signal word that 

indicates a hazard with 

a low level of risk which, if not avoided, could result in 

minor or moderate injury.

NOTICE

The signal word that indicates 

equipment or property 

damage can result if instructions are not followed.

Authorized Service Personnel

 – Factory trained 

personnel or personnel having working knowledge 

of electrical, plumbing and machine (appliance) 

maintenance procedures.

1.4  Personal Safety

DANGER

•  Please read these instructions completely 

before starting the installation or performing 

any service. Failure to follow the instructions 

and safety precautions in this manual can 

result in serious injury or death.

•  Electric supply must be identical in voltage, 

cycle, and phase to that specified on 

nameplate.

•  Electrical power supply must include  

ground-fault circuit interrupter (GFCI) 

protection.

•  A means for disconnecting electrical supply 

to the unit must be incorporated in the fixed 

wiring in accordance with wiring rules. This 

is to allow electrical disconnection of the unit 

from electrical supply after installation.

Failure to do so can result in severe injury to 

person or death

.

WARNING

Follow all instructions related to the installation 

of this product (unit). 

For use with clean, clear potable drinking 

water only. Do not use with water that is 

microbiologically unsafe or of unknown quality 

without adequate disinfection before the 

system. 

Installation and connection to water and 

electrical mains must be in compliance with 

local and national laws.

Summary of Contents for ECP8











Reviews: