Eliz EWH 201, Instruction Manual

Page: 24 / 36

24
Mode Monday Tuesday Wednesday Thursday Friday Saturday Sunday
P1
8:00 - 17:00 8:00 - 17:00 8:00 - 17:00 8:00 - 17:00 8:00 - 17:00 8:00 - 17:00 8:00 - 17:00
P2
18:00 - 7:00* 18:00 - 7:00* 18:00 - 7:00* 18:00 - 7:00* 18:00 - 7:00* 18:00 - 7:00* 18:00 - 7:00*
P3
8:00 - 17:00 8:00 - 17:00 8:00 - 17:00 8:00 - 17:00 8:00 - 17:00
OFF OFF
P4
18:00 - 7:00* 18:00 - 7:00* 18:00 - 7:00* 18:00 - 7:00* 18:00 - 7:00*
OFF OFF
P5 OFF OFF OFF OFF OFF
00:00 - 23:59 00:00 - 23:59
P6
custom setting custom setting custom setting custom setting custom setting custom setting custom setting
Note:
* P2 / P4 mode - switching off is the next morning
P6 - time setting range is 0-24 hours. Starting time must be set before ending time, otherwise, the setting is invalid.
P6 program setting - custom timer setting
In the
P6
program, you can set only 1 time period per day (on-off), the time is set only in hours. Press the button
to select program
P6
and confirm with the OK button. If you do not press the OK button within 10 seconds, the
program setting is invalid. The display shows day
1
(Monday), using the
+ / -
buttons you can select the day from
1 to 7 (Monday-Sunday) for which you want to set the period.
Setting for day 1 - Monday
The display shows 1 and flashes. Press OK, the display shows the time 00 - the beginning of the period. Use the
+ / - buttons to set the starting time 0 - 24 hours, then press OK, the heating starting time setting is completed. The
display shows the ending time of period 00. Use the + / - buttons to set the ending time 0 - 24 hours, then press
OK, the heating ending time setting is completed. The heater switches the heating on and off only on the selected
day and the set period, e.g. 7 a.m. - 3 p.m.
If the period 00 - 00 is set, the heater will not work on that day. If you do not press OK while the day selection (1) is
flashing, the setting will automatically move to the next day (2) after 5 seconds, the time 00-00 will be set for day 1.
The program setting for days 2-7 (Tuesday - Sunday) is the same as for day 1.
Note : It is necessary to set the starting time and the ending time of the heating! The setting must be completed for
all days 1-7 (custom period or time 00:00). When the custom setting for day 7 is completed, the P6 Weekly program
will start and the indicator will be on.
Note :
The heater has a memory that remembers and stores the settings of the Weekly program and the time even after
canceling the program or when turning off the heater using the button. In the event of a power supply failure
and interruption, the settings and time will be deleted. However, after switching off using the
button and
switching on again, it is necessary to set the desired program P1-P6 again.
EN
Changing the weekly program
If you want to change the program setting from
P1
to another, press the button until the desired program
P1 - P6 is selected (description below). Confirm the program by pressing OK . After confirming the program, the
indicator
will be on or flash depending on the program and the current time. If you do not press the OK within
10 seconds, the program setting is invalid. If you press the button 7 times, you will deactivate the Weekly program.
If the heating mode LOW or HIGH is working when activating (switching on) the Weekly program, the heater will
continue in heating at the selected stage. However, heating will take place up to the maximum temperature,
therefore switching on the Weekly program in heating modes LOW or HIGH is not recommended!
Activation of the Weekly program is recommended in Temperature setting mode!
First switch on the Temperature setting mode and set the desired temperature ( see Temperature setting
mode ), and then switch on the Weekly program so that the heater only heats up to the set temperature in the
Weekly program. The display shows the room temperature, the indicator lights
and
will light on.