Eliwell Memory 1000, Manual

Page: 20 / 52

9MA10011 20/52
• First address : set the value for the last address assigned to devices in the
network.
NOTES:
• Network configuration is automatic.
• When adding or removing instruments from the network, repeat the self-
configuration procedure.
• A number of messages confirming successful or failed network recognition/
configuration, and any error messages will be displayed. Follow the instructions
on the display.
• On completion of configuration, menu 4.5.1 will no longer be accessible.
4.5.2 Not used
4.5.3 Not used
4.5.4 General Info
Read-only menu to view the number of devices found in the network and the
Analogue Inputs read by the network. Example (4 devices and 6 Inputs (3 the first
– see Device Analogue Inputs section, 2 the second, 1 the third):
4.5.4 NETWORK 1 GENERAL
Total no. of units 4
Inputs enabled 6
4.5.5 Units
Menu showing the List of Devices, and giving the names of Compatible Televis
Devices configured for Network 1.
4.5.4 NETWORK 1 UNITS
00.01 N1-F.0-D.1
00.02 N2-F.0-D.2
00.03 N3-F.0-D.3
00.04 N4-F.0-D.4
Each element in the List of Devices includes the Name of the Device (example Nx)
and the Televis address in format Televis (F:D).
Select the required Device (example 00.01) using the Up and Down keys and
press OK.
A menu will open listing the following:
4.5.4 NETWORK 1 UNITS
Unit Index 01/04
Address 0:1
Unit managed SI
Name
Alarm 1 output
1
Probe info >>>