PAR.
DESCRIPTION
RANGE
App1 App2 App3 App4 M.U.
H50
Enable HACCP and alarm relay functions.
0
= HACCP alarms NOT enabled;
1
= HACCP alarms enabled and alarm relay NOT enabled;
2
= HACCP alarms enabled and alarm relay enabled.
0/1/2
0
0
0
0
num
H51 HACCP alarm exclusion time.
0 ... 250
0
0
0
0
min
CONFIGURATION (“CnF” folder)
H00 Probe type selection.
0
= PTC;
1
= NTC;
2
= PT1000.
0/1/2
1
1
1
1
num
H11
Configuration of digital input 1/polarity.
0
= disabled;
±1
= defrost;
±2
= economy
Setpoint;
±3
= not used;
±4
= door switch;
±5
= external alarm;
±6
= Standby;
±7
= pressure switch;
±8
= Deep Cooling;
±9
= disable HACCP alarm logging.
NOTE: •
the “+” sign indicates that the input is active if the contact is closed.
•
the “-” sign indicates that the input is active if the contact is open.
-9 ... +9
2
2
0
0
num
H21 (
IDPlus 961 only
). Configurability of digital output 1 ( ).
0
= disabled;
1
= compressor;
2
= defrost;
3
= fans;
4
= alarm;
5
= AUX;
6
= Standby.
0 ... 6
1
1
1
1
num
H22 (
IDPlus 902 only
). Configurability of digital output 1 ( ). Same as H21.
0 ... 6
1
1
1
1
num
H31
Configurability of UP key.
0
= disabled;
1
= defrost;
2
= not used;
3
= economy Setpoint;
4
= Standby;
5
= reset HACCP alarms;
6
= disable HACCP alarms;
7
= Deep Cooling.
0 ... 7
1
0
0
1
num
H32 Configurability of DOWN key. Same as H31.
0 ... 7
0
0
0
0
num
H43 Probe Pb3 present.
n
= not present;
y
= present.
n/y
n
n
n
y
flag
reL Device version. Read-only parameter.
/
/
/
/
/
/
tAb tAble of parameters. Reserved: read-only parameter.
/
/
/
/
/
/
COPY CARD (“FPr” folder)
UL Programming parameter transfer from instrument to Copy Card.
/
/
/
/
/
/
Fr
Format Copy Card. Erase all data contained in the Copy Card.
NOTE: if parameter “Fr” is used, the data entered will be permanently lost.
This operation cannot be cancelled.
/
/
/
/
/
/
FUNCTIONS (“FnC” folder)
rAP Reset pressure switch alarms
/
/
/
/
/
/
rES Reset HACCP alarms
/
/
/
/
/
/
NOTE
: If one or more parameters marked with (!) are modified, the controller MUST be switched off and then switched on again to ensure correct operation.
