ACCESSING AND USING THE MENUs
The resources are organized into 2 menus which are accessed as follows:
• ‘Machine Status’ menu: press and release the
key.
• ‘Programming’ menu: hold down the
key for 5 seconds.
Either do not press any keys for 15 seconds (timeout) or press the
key once, to confirm the last value displayed and return to the previous
screen.
PASSWORD
Password ‘PA1’
: used to access
User
parameters. The password is not enabled by default (
PS1
=0).
To enable it (
PS1
≠0): press and hold
for longer than 5 seconds, scroll through the parameters using
and
until you see the label
PS1
, press
to display the value, modify it using
and
, then save it by pressing
or
. If enabled, it will be required in
order to access the User parameters.
Password ‘PA2’
: used to access
Installer
parameters. The password is enabled by default (
PS2
=15).
To modify it (
PS2
≠15): press and hold
for longer than 5 seconds, scroll through the parameters using
and
until you see the
label
PA2
, press
, set the value to ‘15’ using
and
, then confirm using
. Scroll through the folders until you find the label
diS
and press
to enter. Scroll through the parameters using
and
until you see the label
PS2
, press
to display the value,
modify it using
and
, then save it by pressing
or
.
The visibility of
‘PA2’
is as follows:
1)
PA1
and
PA2 ≠ 0
: Press and hold
for longer than 5 seconds to display
PA1
and
PA2
. It will then be possible to decide whether to
access the User parameters (
PA1
) or the Installer parameters (
PA2
).
2)
Otherwise
:
The password
PA2
is amongst the level1 parameters. If enabled, it will be required when accessing the Installer
parameters; to enter it, proceed as instructed for password
PA1
.
If the value entered is incorrect, the label
PA1
/
PA2
will be displayed again and the procedure will need to be repeated.
