EWRC 300/500 NT
6 - EN
English
KEYS
USER INTERFACE
How to modify the SetPoint
• Press and release the SET key. The upper display will show SEt, the lower display will indicate the cur-
rent SetPoint value
• Press and release the SET key once more. The upper display will show SEt blinking
• Use the UP & DOWN keys to adjust the Setpoint value
• Press the ESC key several times (or keep it pressed) to return to the normal display
How to read the probe value
• Press and release the SET key. The upper display will show SEt, the lower display will indicate the cur-
rent SetPoint value
• Press and release the DOWN key. If the RTC clock is present, the time will be shown in the lower display
• Press and release the DOWN key once more. The upper display will show Pb1, the lower display will
indicate the value read by the room probe
• Press and release the DOWN key once more to read the value of probe Pb2 and Pb3 if configured
• Press the ESC key to return to the normal display.
How to modify the User Parameters
The user parameters are the most useful parameters and are described in this document, in the
section Parameters Table.
1) Press and hold the SET key for 3 seconds until the display shows PAr / USr
2) Press and release the SET key once more. The upper display will show the first parameter, the lower
display will indicate the current parameter value
3) Using the UP & DOWN keys, find the parameter that you wish to modify
4) Press and release the SET key once more. The upper display will show the name of the blinking pa-
rameter
5) Use the UP & DOWN keys to adjust the parameter value.
6) Press and release SET to save the parameter value
7) Return to step 3) or press ESC several times to return to the normal display
No.
KEY
press and release
press and hold for about
3 seconds
NAVIGATION MENU
Notes
A
ESC key
Defrost
• Functions Menu
• Manual defrost
• Return to Main Menu
• Output
B
p
UP
Alarms
• Alarms Menu (always visible)
/
• Scroll
• Increase values
HACCP alarms
only on foreseen models
and if present
C
SET
• Display SetPoint / probe values /
time (Models with clock)
• Confirm values
• Access value edit mode
(upper display blinking)
• Access Parameters Menu
• Confirm values
• Move right
display time
Models with clock only
D
q
DOWN
AUX
system INFO
See Technical Support
Activate auxiliary function
• Scroll
• Decrease values
E
ON/OFF
/
Switch On/Off
device
/
F
LIGHT
/
Switch light on/off
/
