6
PROGRAMMING MENU
To access the ‘Programming’ menu press for at least 5 secs the
set
key. If specified, the ‘PA1’ for the level
1 parameters and the ‘PA2’ for the level 2 parameters access PASSWORD will be requested (see Par.
‘PASSWORD’) At the access, the display will show the first parameter (“diF”). By pressing the
and
keys
you can scroll all parameters in the current level:
5 secs
Select the desired parameter using the
and
keys. Press
set
to see the current value of the selected
parameter. Press
and
to change the value and then press
set
to save it.
NOTE
: It is strongly recommended that you switch the device off and on again each time the parameter
configuration is changed, in order to prevent malfunctioning of the configuration and/or ongoing timings.
PASSWORD
‘PA1’ Password
: It allows access to the level 1 parameters. In the standard configuration the password is disabled
(value = 0). To enable it (value ≠ 0) enter the “Programming” menu by pressing the
and
keys, scroll the
parameters until “PS1” label is displayed, press the
set
key to display the current value, change it by using the
and
keys and then press the
set
key to save it. If the password is already enabled, you will be required to enter
it to access the ‘Programming’ menu. To enter it:
set
set
set
‘PA2’ Password
: It allows access to the level 2 parameters. In the standard configuration the password is enabled
(valore ≠ 0). To change its value follow the steps like for ‘PA1’ and change the ‘PS2’ parameter value.
The visibility of the ‘PA2’ label will be:
1) If
PA1
and
PA2 ≠ 0
: By pressing the
set
key for more than 5 seconds, “PA1” and “PA2” labels will be displayed
at the same level and it will be possible to access either the level 1 or the level 2 parameters.
2)
Otherwise
: The ‘PA2’ password is present between the level 1 parameters. If ‘PA2’ is enabled, you will be required
to enter it to access the level 2. To enter it follow the steps described for the ‘PA1’ password.
If the password is incorrect, the instruments display the PA1/PA2 label and you will have to repeat the entry
procedure.
set
set
set
