Eliwell EWHT 1800LX, Manual

Page: 45 / 142

d
el
ay
d
ef
ro
st
af
te
r
D
C
C
p
ar
.
d
cc
12
12 12
12 DEEP
DEEP DEEP
DEEP COOLING
COOLING COOLING
COOLING CYCLE
CYCLE CYCLE
CYCLE
Deep Deep Deep Deep Cooling Cooling Cooling Cooling Cycle Cycle Cycle Cycle Function Function Function Function
The Deep Cooling (DCC) function is activated by parameter 1150:H01. 1150:H01. 1150:H01. 1150:H01.
The corresponding LED will light up when the function is active.
Activation of DCC from function key: the
compressor
regulates in relation to setpoint 1016:
1016: 1016:
1016: dCS
dCS dCS
dCS with a differential equal
to the value set in parameter 1002:
1002: 1002:
1002: diF
diF diF
diF for the time set in parameter 1017:
1017: 1017:
1017: tdc
tdc tdc
tdc (deep cool cycle).
When the DCC ( Deep Cooling Cycle ) activates, the interval between defrost cycles is cleared and defrosts disabled. After a
DCC cycle and once the time set in parameter 1018:dcc
1018:dcc 1018:dcc
1018:dcc has elapsed, a
defrost
cycle is forced and the counters restart for
the interval between defrost cycles (value set in parameter 1029:dit 1029:dit 1029:dit 1029:dit ).
During the DDC cycle, temperature alarms are disabled - except for the low temperature one – 1082: 1082: 1082: 1082: LAL LAL LAL LAL ....
Normal temperature alarm control is restored at the end of the DCC cycle. In the event of a probe error and/or power
failure, the
Deep Cooling Cycle
is stopped and standard controller function restored. If
parameters 1
016:
016: 016:
016: dcS
dcS dcS
dcS ,,,, 1017:
1017: 1017:
1017: tdc
tdc tdc
tdc
and and and and 1018: 1018: 1018: 1018: ddc ddc ddc ddc are modified, the Deep Cooling Cycle is recalculated with the new values set.
End defrost (dSt) temperature
set
set DCC
key
DCC timeout
par.tcd
defrost timeout
compressor
defrost
EWHT 1800LX
45/141