Record capacity: 4000 points(MAX)
Resolution:0.1
℃
(0.1
℉
)
Record interval:1~255 min continuously set
Delayed start:1~255 min continuously set
Battery:Wide temperature CR2032 lithium manganese battery
Battery life: one year under 25
℃
environment temperature with 15 minutes
record interval in cyclic storage mode
Size:70mm * 50mm *2.4mm
Weight:About 10 grams
Start mode:Button start (Press and hold the button for more than 4 seconds)
Storage mode:Cyclic storage mode,over-max-record-capacity stop mode
Stop mode:over-max-record-capacity stop,stop after reading the recorded data
Device for reading data:Android mobile phone with NFC function
Method for reading data:Place the back of the mobile phone directly above the
logger within 5 centimeters
Operating system: Android 4.0 or above
3.Operation procedures
3.1 Download the APP software for the mobile phone
Using an Android phone with NFC function to scan the two-dimension code in
Fig.1 or on the surface of the logger,you can download and install the APP.
The icon shown in Fig.2 appears on the desktop after the installation is
complete.
Fig.1
Fig.2
3.2 Enable the NFC function of the mobile phone
Open the NFC Data Logger APP software and enable the NFC function according
to the prompt of the software,as shown in Fig.3 and Fig.4. Refer to the user manual
of the phone for detailed operation procedure.
