Elite SANREMO RACE LOCK, Instructions For Use Manual, Page: 8 / 39

ENGLISH
EN
8
The slide shall then clock twice and go back
to its first position. (pic 23).
• Once you selected the handle side, insert
the screws to clamp the supports on the bar.
• Slip forward the front support slide (Ref. A)
by one click (pic 24), so that you can insert
the screws (Ref. F) and the washers (Ref. H)
in their own seatings (pic 25).
• Lock the front support (Ref. A) and the
lower support (Ref. C) with the supplied Hex
key, by interjecting them with the bar rack
(pics 26, 27 and 28). Tighten bolts until
they’re completely locked.
• Closet the front support slide (Ref. A) (pics
29 and 30) , lock the handle in its seating (pic
7) with the anti-theft key (pic 31).
USE
• Release the fast fixing mechanism of the
rear support (Ref. B) (pic 32).
• Remove the front wheel of the bike and
place the rear wheel above the cradle of the
rear support (Ref. B) (pics 33 and 34).
• Open the lever completely and place the
fork of the bike on the front support pin (Ref.
A) – the fork has to lean freely and without
obstructions (pic 35).
• If that doesn’t happen (pic 36), turn the
adjusting bush (Ref. M) on the front support
(Ref. A) facing the direction of the arrow (pic
37) until both edges of the fork can be inser-
ted without obstructions (pic 38).
ATTENTION: to facilitate insertion of the bicycle
fork on the pin, pull the handle with one hand until
the ends of the fork can enter freely (Fig. 39).
• Place the handle lever at 0-20° (pic 40) and
turn the adjusting bush (Ref. M) (pic 37) until
it gets to 0-20° without coming into contact
if the surface of the front support and the
fork are already touching.
• If the distance between surface of the front
support and fork is more than 0-20° (pic 40)
while positioning the handle lever, turn the
adjusting bush (Ref. M) (pic 41) until it gets
to 0-20° without coming into contact.
• Close the lever and place correctly the
edge of the pin on the handle (pic 42 and 43)
and turn the anti-theft key (pic 31).
• Remember to always remove the key befo-
re use (we suggest to store separately the
spare key we supply in order to have it ready
in case you misplace the first one).
• Position the rear wheel of the bike on the
cradle of the rear support with the supplied strap
(Ref. E) by making it slide into its proper slots.
Close the fast fixing mechanism (pic 44).
MAINTENANCE
• Always clean the Sanremo Race Lock after use.
• Do not use solvents or strong detergents.
• Do not use products with abrasive substances.
WARNING
• Always remove the key before the race.
• After the first few miles check the correct
positioning of the bike and do so periodically
to time while travelling (pic 50).
• Check that bike parts (cables and other
components) are not excessively constrai-
ned when assembling (pics 55-56-57-58).
OTHER ACCESSORIES
(only on demand)
• Pivot Pin adapter (Rif. N);