Elite PI-121, Operator'S Handbook Manual

Page: 373 / 390

351
CHAPTER 6: Trouble Shooting
SOUND NOT WORKING PROPERLY
Direct X drivers possibly corrupted.
Need to install latest version of Direct X (www.microsoft.
com/directx)
CONTROLS
I have a yoke or stick that is not ELITE brand. How do
I program the buttons to perform specifi c tasks (Trim
up, parking brake, freeze, etc...)?
ELITE has a built in programming system. To fi nd it,
open ELITE and go to the CONFIGURATION screen. On
the top left hand side is a category called HARDWARE
CONFIGURATION with 2 SET buttons within it. Click on
the SET button next to “Computer”.
This will open up a new window with 4 options. You want to
hit the CHANGE button next to “Game Controller”.
You will then see a window with your stick/yoke (or stick/
yoke and pedals) listed. Highlight the stick/yoke and hit the
SELECT button under “Main Flight Controls”, then click the
CONFIGURE button beneath it. This will open the Flight
Control Confi guration screen.
On this screen all the axes of the stick/yoke will be listed
on the top and the buttons on the bottom. When you push
a button (or rocker/HAT switch) it will turn red. Once it is
highlighted use the pull-down window next to “Function” to
select the function for THAT button. Push the next button
you want to program and select its function. Repeat until
all your buttons have been programmed.
My USB Rudders are reversed, how do I fi x this?
When you launch the simulator go into the Confi guration
screen (ALT+G) and click computer set. Click “Game
Controller Change” (If that button is not accessible you will
need to exit the software and delete the PREF folder in the