Step 11:
Adjust the travel distance of the gate with the
limit switches. Loosen the 2 bolts of each limit switch
armature. Slide to adjust. Position the
outside limit switches
of each armature to stop the gate in the
“full open”
and
“full closed”
positions. Re-tighten armature bolts when gate positions are correct.
Step 12:
Reinstall the operator cover with the 4 screws to
complete
the installation.
Outside Limit
Switch
Outside Limit Switch
Inside Limit
Switch
Inside Limit Switch
Limit Switch
Armature
Limit Switch Armature
Adjustment Bolts
Adjustment Bolts
12
P R O C E D U R E F O R I N S T A L L A T I O N
A d j u s t i n g t h e L i m i t S w i t c h e s
