Elite CR-202, Manual

Page: 39 / 88

39
Forcing an amount tendered
It is possible to force the operator to enter the amount given by the customer for every sale, ensuring change is
calculated every time.
Feature option
Choice Answer
Compulsory amount tendered. No =
0
Yes = 1
Cash and Credit Card Names
There is a single credit card function on the keyboard, this is used to recall up to 9 credit card types, by entering
the number and pressing the key. Each of these credit card payments can be pre-programmed with a name.
VAT Rates
The system can have either tax addition or extraction programmed, as default the cash register is set for tax addition. This
can be changed in the system flags as required. It is possible to program 5 tax rates identified by a number 1 – 5, this
number is then set to the department key. You must ensure any goods sold thru or linked to that department should be
sold at the rate specified. This will provide a vat break down on both the receipt and financial report if required
Program Settings
SUBTOTAL
CARD
P Mode
Enter the 10 character name
A
MISC
TEND
CASH
=
SUBTOTAL
P Mode
Enter all the answers from the table below
Programming Payment Options
Etc
Programming VAT Rates
SUBTOTAL
VAT /
SHIFT
Enter the 10 character name
i.e. VATABLE
Etc
SUBTOTAL
Enter the VAT rate with 4 decimals
i.e. 175000 for 17.5%
Enter VAT number 1- 5
P Mode
Enter Card No. 1 – 9
or
Enter 10 for Cash name change
A
00
00