Elite CR-202, Manual

Page: 19 / 88

19
Printing functions
This will feed the paper roll
This is used to turn the receipt on or off.
This is used to issue a customer copy of the receipt. It is possible to back
track through the last three receipts, by entering the number 1 2 or 3 and
pressing this key.
General Functions
to
These are numeric keys used to make entries.
It should be noted the decimal position is used only for entering decimal
quantities during multiplication
This key is used to clear a numeric amount which has not been registered
through a department or PLU, or to stop the error tone of the register
This key is used during transactions to enter multiple quantities of the same
item. Outside of a sale this key will display the current time
This function is used to display the current sale total during a transaction.
Product Keys
The system allows 1200 Price Look Up codes to be programmed to the cash
register memory for open or preset price sales. Entering the code number of
the product and pressing this key will register the item sale.
The eight department keys are used to register sale items either as open or
pre-set price items
Discount and Surcharges
This key can be programmed to carry out any monetary/percentage discount
or surcharge operation within a sale. A rate can be pre-programmed to the
key for fixed amounts. The key as default is programmed to act as an open
percentage minus amount
This key can be programmed to carry out any monetary/percentage discount
or surcharge operation within a sale. A rate can be pre-programmed to the
key for fixed amounts. The key as default is programmed to act as an open
minus amount
COPY
RECPT
.
CLEAR
X /
TIME
SUBTOTAL
Functions Explained
#1
PLU /
AMT
% 1
(%-)
% 2
(-)
PAPER
FEED
RECPT
ON/OF
0 9