6.6 Sharpening of saw blades
To use stem template or template double stem apices. The top of the clamp is
in front of the disk. The shaft of the sanding wheel tilts up 5º-10º to decide the
back angle. The blade teeth should be sharpened one by one.
6.7 Sharpening of carving tools
The cutting tool is set to the shank of the toolholder. The toolholder turn right
at an angle of 60°. Blocking position is set at a suitable position. The grinding
workhead motor and the toolholder will start separately, so that the sanding
wheel and the workpiece rotate in opposite directions. Use the steering wheel
(6) for supply. Move the worktable and sharpen.
!
21
C/Casanovas 1, 08782, St. Joan Samora - Barcelona (Spain) - Phone +34 932 935 178 - [email protected]
