7. MANTEINANCE
ATTENTION
Do not clean or realize machine maintenance while it is
connected to the power source:
It can damage the machine and the person!
Therefore: Turn off the machine and disconnect it from the source supply
before carrying out any maintenance or cleaning.
-
The machine is low maintenance and contains only a few parts that must be
serviced.
-
Any damage or defect that could affect the safety of the machine, must be
removed immediately.
-
Repair activities can only be carried out by qualified personnel!
-
Thorough cleaning ensures long life to the machine and is a safety
requirement.
-
The use of solvents, harsh chemicals or abrasive cleaners can damage the
casing of the machine. For cleaning use only mild detergents.
- Apply a light coat of anti-corrosion (eg WD40) on unpainted surfaces of the
machine.
- After each work shift, the machine and all its parts are thoroughly cleaned of
dust and chips with vacuum cleanse. It’s important not use compressed air for
cleaning, then engages the particles within the guides and bearings.
- Check regularly that all warnings and safety instructions are available on the
machine and legible.
-
Before each use check the status of safety devices.
-
The machine can not be stored in a wet place and must be protected from
weather conditions.
Working repair can only be done by qualified personnel! The lack of
maintenance will void the warranty and warranty claims!
!
24
C/Casanovas 1, 08782, St. Joan Samora - Barcelona (Spain) - Phone +34 932 935 178 - [email protected]
