Fig. 2
Caution:
Before installing or operating the lighting, read and understand all safety instructions and warnings.
canoPY InstallatIon
Into an aquarium canopy or
existing hood
Install the canopy mounting
clips to the underside
of the canopy using
appropriately sized screws
Hardware used must be capable of supporting the weight of
the installed eLite LED Tube Light. The clips must be installed
in-line with one another and spaced so they will clip
approximately 4 inches in from each end of the LED tube.
See Figure 2.
Snap the ends of the
LED tube light(s) into
the mounting clips and
rotate the lamp so the LEDs are
facing the direction you would
like the light to shine
Connect the plug for each LED tube light to the 1 or 3 tube
transformer (sold separately). Slide the protective rubber
sleeve over the connection(s) to protect it from moisture.
Once all connections are made, the transformer can be
plugged into an acceptable outlet and the eLite LED Tube
Light is ready for use.
C
D
Canopy surface (underside)
Installed
in-line
Canopy mounting clips
4"
4"
LED Tube Size/Output
LED Tube
LED
Lumen
Size Wattage Count Output
18"
3.0
14
280
24"
4.0
20
400
30"
5.5
26
520
36"
7.0
32
640
48"
10.0
45
900
eLite LED Tube
